After successfully using AVRISP MKII programmer using the AVR Studio 4 for purposes of programming, debugging and downloading to the device, then the next step is to use the Software codevision to do programming using C language, debugging and downloading to the device, with the following steps.
1. Open the program Codevision 2:03:09, as shown in the following figure.
2. In the c compiler Tab, select the chip that will be used, the clock circuit used target
3. For the filling process files to the device, perform the selection of HEX files on the File menu, as shown in the following figure:
4. If step 3 has been done then the HEX file will be ready to be loaded into the device, select the icon programmer to do the process of filling the hex files to the devices that we use as a target, which must first be selected device that we will use, and select the button for all program began a process of filling the HEX file to the device, remove, fill and verify